Filter
Top Products
13
GB
Watching TV
Watching TV
1 Press 1 on the top edge of the TV to turn
on the TV.
When the TV is in standby mode (the 1 (standby)
indicator on the TV front panel is red), press "/1
on the remote to turn on the TV.
2 Press DIGITAL to switch to digital mode, or
press ANALOG to switch to analogue
mode.
The channels available vary depending on the
mode.
3 Press the number buttons or PROG +/- to
select a TV channel.
To select channel numbers 10 and above using the
number buttons, enter the second and third digits
quickly.
To select a digital channel using the Digital
Electronic Programme Guide (EPG), see page 15.
In digital mode
An information banner appears briefly. The
following icons may be indicated on the banner.
: Interactive service is available (Digital Text)
: Radio service
: Scrambled/Subscription service
: Multiple audio languages available
: Subtitles available
: Subtitles available for the hearing impaired
: Recommended minimum age for current
programme (from 4 to 18 years)
: Parental Lock
c (in red):
Current programme is being recorded
Additional operations
To access Digital Text
Many broadcasters provide a Digital Text service.
Digital Text offers graphically rich contents,
compared to Analogue Text.
Select a digital channel which provides Digital Text,
then press /.
When a broadcaster provides a dedicated Digital Text
channel, select this channel to access Digital Text.
To navigate through Digital Text, follow the
instructions on the screen.
Watching TV
2
2
3
3
To Press
Freeze the picture
(Picture freeze)
.
Press once to remove the small
screen, then press again to return
to normal TV mode.
~
This function is not available for a
PC input source.
Access the
Programme index
table (in analogue
mode only)
.
To select an analogue channel,
press
F/f, then press .
Access the Digital
Favourites (in digital
mode only)
.
For details, see page 17.
Mute the sound %.
Press again to restore.
Turn on the TV
without sound from
standby mode
%.
Continued