Filter
Top Products
S!%e ?"%Y
Many TV features can be accessed directly through the remote control. The
following will explain the function of some of the buttons found on your
remote control.
Buttons for LCD
Projection TV
Operations
Press to have the remote control operate the TV. The indicator lights up
momentarily when pressed to show which equipment the remote control is
operating.
Press to change between the VHF/UHF input and the AUX input.
Turn the LCD projection TV on and off. Ifa video input indication (e.g.,
VIDEO 1, VIDEO 2) appears on the screen, press TV/VIDEOor CH +/- until
a channel number appears.
Use for direct channel selection. Press 0-9 to select a channel (for example,
to select channel 10, press 1 and 0). The channel will change after 2 seconds,
or you can press ENT for immediate selection.
Press to scan through the channels (+ up or - down).
Press to adjust the volume (+ up or - down).
Press to alternate or jump back and forth between two channels. The LCD
projection TV will jump between the current channel and the last channel
selected.
Press to mute the sound. "MUTING" will appear on the screen. To restore
the sound, press again or press VOL+.
This is useful when you need to copy down information that appears on the
LCD projection TV's screen (see "Using the Freeze Function" on page 53).
46