Filter
Top Products
Loosen the two screws that secure the lamp, then pull out the lamp.
The lamp is very hot immediately after use. Never touch the front glass
of the lamp or the surrounding parts.
Loosen the two screws with the
hex key supplied with the lamp.
Hold the handle and pull
straight out.
After ithas cooled, placethe removed lampinto the empty boxof the
replacementlamp. Neverput the removed lamp into a plastic bag.
Mount the new lamp.
Be sure to attach the new lamp securely.
.........ii
Mount the new lamp securely
into the lamp receptacle.
Tighten the two screws securely in the
order of @ to @, as shown in the
illustration using the supplied hex key.
Mount the lamp cover and tighten the screw.
Make sure that the lamp cover is mounted securely, otherwise the power
will not turn on.
Match the projection of the right side of the lamp cover with the hole ofthe
unit, and replace the lamp cover as it was.
(Continued)
15