Filter
Top Products
Use this hookup if:
; You subscribe to a cable TV system that uses scrambled or encoded
signals requiring a cable box to view all channels, and
; You do not intend to hook up any other audio or video equipment to
your LCD projection TV.
When all channels are routed through your cable box, only one unscrambled
channel is sent to the LCD projection TV, so you cannot use the Twin View
feature. If some channels are scrambled, but others are not, consider using
the hookup on page 26 instead.
Connect the coaxial connector from your cable service to the cable
box's IN jack.
Using a coaxial cable, connect the cable box's OUT jack to the LCD
projection TV's VHF/UHF jack.
Cable
_ _/@ Rear of LCD projection TV
VHF/UHF
IN OUT
Cable box
Also, set Cable to On in the Channel menu (see page 76).
Your Sonyremote control canbe programmed to operateyour cablebox
(see"Programming the RemoteControl" on page86).
Tochange channelsusing the cablebox, setyour LCDprojection TVto
channel3 or 4 dependingon the cablebox channeloutput. If you will be
controlling all channelselectionthrough your cable box, consider using
the ChannelFixfeature to setyour LCDprojection TVto channel 3 or 4
(seepage76).
Setting the Channel Fix feature in the Channel menu (see "Using the
Channel Menu" on page 76), ensures that you do not accidentally switch
the channels using your LCD projection TV.
28