Filter
Top Products
43
Setup
Digital TV Set-Top
Box with
Component
Video Connectors
To connect a digital TV set-top box with component video connectors
1 Use three separate component video cables to connect the set-top box’s
Y, P
B and PR jacks to the Y, PB and PR jacks (VIDEO 4) on the TV.
The Y, PB and PR jacks on your set-top box are sometimes
labeled Y, C
B and CR, or Y, B-Y and R-Y. If so, connect the
cables to their matching color jacks.
2 Use an audio cable to connect the set-top box’s audio output jacks to the
TV’s VIDEO 4 audio input jacks.
Notes on Using This Connection
You cannot record the signal from any equipment connected
into the Y, P
B, PR jacks.
To Do This ... Do This ...
Watch the digital TV set-top box Press TV/VIDEO repeatedly to select the digital TV set-top box input (VIDEO 4 in
the illustration).
Label video inputs to easily
identify equipment connected to
the TV
See the instructions for setting up Video Labels on page 90.
AUDIO IN
AV MOUSE
4
HD/DVD IN
( 1080i / 720p / 480p / 480i )
CONTROL S
AUDIO
OUT
SUBWOOFER
OUT
R–AUDIO–L Y P
B
P
R
5
1
VIDEO IN
R–AUDIO–L
R–AUDIO–L
VIDEO S VIDEO
3
OUT
(VAR/FIX) (VAR)
Rear of Media receiver unit
Audio cable
Digital TV Set-Top Box
Component video cables