Filter
Top Products
23
GB
KLV-46S200A
2-891-357-11(1)
Using MENU Functions
Setup menu
You can select the options listed below on the Setup
menu. To select options in “Settings”, see “Navigating
through menus” (page 17).
Auto Startup
Starts the “first time operation menu” to tune in all the available channels. Usually
you do not need to do this operation because the channels are already tuned when the
TV was first installed (page 5, 6). However, this option allows you to repeat the
process (e.g., to retune the TV after moving house, or to search for new channels that
have been launched by broadcasters).
Language
Selects the language in which the menus are displayed.
Video Labels
Assigns a name to any equipment connected to the side and rear jacks. The name will
be displayed briefly on the screen when the equipment is selected. You can skip an
input source that is not connected to any equipment.
1 Press
F/f to select the desired input source, then press .
2 Press F/f to select the desired option below, then press .
Equipment labels: Uses one of the preset labels to assign a name to connected
equipment.
“Edit:”: Creates your own label. Follow steps 2 to 4 of “Program Labels” (page 26).
“Skip”: Skips an input source that is not connected to any equipment when you press
to select the input source.
Auto S Video
Selects the input signal from S video sockets when / 1/2 sockets are
both connected.
Continued
010COV.book Page 23 Friday, September 8, 2006 9:24 AM