Filter
Top Products
22
Additional Information
SmartLink
SmartLink is a direct link between your projection TV set and a VCR.
For SmartLink you need:
• A VCR which supports SmartLink, NextView Link, Easy Link or Megalogic.
Megalogic is a trademark of Grundig Corporation.
EasyLink is a trademark of Philips Corporation.
• A fully-wired 21 pin SCART cable to connect your VCR to the Scart connector :3/q3
(SMARTLINK) on the rear of the Projection TV.
The features of SmartLink are:
• Tuning information such as the channel overview are downloaded from the projection
TV set to the VCR.
• Direct projection TV recording: While watching TV you need to press just one button on
the VCR to record this programme.
• Automatically switching on: With the projection TV in standby mode, pressing the
“Play z” button on your VCR automatically switches the TV on.
For more information on SmartLink, please refer to the Instruction Manual of your
VCR.
VCR
03GBKP44PX2U.fm Page 22 Tuesday, January 14, 2003 4:29 PM