Sony KP-46WT510 Projection Television User Manual


 
Introducing the Sony Projection TV
9
Introducing the Sony Projection TV
Model name1[KP-46WT510] Model name2[KP-51WS510] Model name3[KP-57WS510] Model name4[KP-65WS510]
[4-094-605-11]
Wide Screen Mode: Allows you to watch 4:3 normal broadcasts in
wide screen mode (16:9 aspect ratio).
Auto Wide: Allows you to select the wide screen mode automatically.
Flash Focus
: Allows you to adjust convergence automatically.
Manual Convergence: Allows you to manually adjust the convergence
of specific areas of the screen.
Digital Visual Interface (DVI): Can accommodate a copyprotected
digital connection (HDCP
*
) to other devices (such as digital set-top
boxes) that have compatible interfaces. The DVI-HDTV input terminal
is compliant with the EIA-861 standard and is not intended for use with
personal computers.
Using this manual
We recommend that you carefully review the contents of the following three
sections in the order shown to ensure that you fully understand the operation
of your new projection TV.
1 Installing and Connecting the Projection TV
This section guides you through your initial setup. It shows you how to
install your projection TV, to connect your new components and to connect
the antenna and cable.
2 Using the Features
This section shows you how to begin using your new projection TV. It also
shows you how to use your remote control functions.
3 Using the menus
This section teaches you how to access on-screen menus and adjust your
projection TV settings.
Instructions in this manual are written for the remote control. Similar
controls are also found on the projection TV console.
* High-bandwidth Digital Content Protection