Sony KP-51WS520 Projection Television User Manual


 
12
SETUP SETUP SETUPSETUP SetupSETUP
Front Panel
Rear Panel
Item Description
1 FLASH FOCUS Press to adjust the convergence (see page 40).
2 TV/VIDEO Press repeatedly to cycle through the video equipment connected to the TV’s
video inputs.
3 -VOLUME + Press to adjust the volume.
4 -CHANNEL+ Press to scan through channels. To scan quickly through channels, press and
hold down either CHANNEL button.
5 TIMER LED When lit, indicates one of the timers is set. When the timer is set, this LED will
remain lit even if the TV is turned off. For details, see page 73.
6 STAND BY LED Blinks when the TV is turned on, then shuts off when the picture is displayed.
If the LED blinks continuously, this may indicate the TV needs service (see
“Contacting Sony” on page 77).
7 POWER Press to turn on and off the TV.
8 Infrared Receiver (IR) Receives IR signals from the TV’s remote control.
FLASH FOCUS
TV/VIDEO
— VOLUME
+
— CHANNEL
+
TIMER
STAND BY
POWER
1
2 3 4 5 6 7
8
3
4
6
1
7
2
5
9
8
AX1X.book Page 12 Wednesday, June 30, 2004 9:21 AM