Sony KP-57WS520 Projection Television User Manual


 
39
SETUP Setup SETUPSETUP SETUPSETUP
Setting Up the Channel List
After you finish connecting the TV, you need to run the Auto
Program feature, which automatically creates a list of available
channels. The Auto Program screens appear when you turn on your
TV for the first time after hooking it up.
Using Auto
Program
To run Auto Program the first time you turn on your TV
1 Press POWER to turn on the TV.
The Initial Setup screen appears.
2 When prompted to start Auto Program, press the CH+ button to
start Auto Program.
To run Auto Program again at a later time
Use the Auto Program feature as described on page 67.
To reset the TV to factory settings
1 Press POWER to turn on the TV.
2 Hold down RESET on the remote control.
3 Press TV POWER on the TV. (The TV will turn itself off, then back
on.)
4 Release RESET.
AX1X.book Page 39 Wednesday, June 30, 2004 9:21 AM