Sony KP-48V90 Projection Television User Manual


 
28
Adjusting Your SET UP (menus) (continued)
Sony KP-43T90/48V90/53S76/53V90/61V90 (US) 4-082-881-13 (1)
Speaker
Custom selection
of audio output
source
Audio Out
Easy control of
volume adjustment
SAVA SP Control
Controls Sony
SAVA speakers
mode.
On: Select to listen to the sound from the projection TV speakers alone.
Off: Select to turn off the projection TV speakers and listen to the
projection TVs sound only through an external audio systems speakers.
See Connecting an audio system on page 16.
SAVA SP: Select to turn off the projection TV speakers and listen to the projection
TVs sound only through the Sony SAVA series speaker system. You can
adjust volume, muting, Surround Mode, and Super Woofer Mode with the
projection TVs remote control. (see SAVA SP Control below)
See Connecting a Sony SAVA series speaker system on page 17.
Audio Out can only be set when Speaker is set to Off.
Fixed: Sound output is held at a fixed level through the audio system.
Use the AV receivers remote control to adjust the volume.
Variable: Sound output varies according to the TV settings.
Useful when you want to use your remote control to control the output of a
separate audio system.
SAVA SP Control can only be set when Sony SAVA speaker system is
connected to the AUDIO (VAR/FIX) OUT connectors and Speaker is set to
SAVA SP. (see Speaker above)
You can also adjust the SAVA speakers volume using VOL +/ of the projection
TVs remote control.
Surround Mode: Select to activate the SAVA Speakers surround mode.
Super Woofer Mode: Select to activate the SAVA Speakers super woofer mode.
01GB08ADJ-E.P65 3/9/02, 3:40 PM28