Filter
Top Products
39Adjusting Your Setup (MENU)
3
Move up or down to
select the desired option
(see the table below),
then press
.
Notes
• When you turn on “ECO MODE”, the picture may become dimmer.
Turning “ECO MODE” off will restore the picture to its original setting.
• “WIDE MODE” is available only when you have selected DRC1250
(NTSC mode) in the ”A/V CONTROL” menu with video input or DVD
input.
• “WIDE MODE” and “GAME MODE” is available only when receiving
signals through the t (video input), (S video input), or
(component video input) jacks at the front and rear of your projection
TV.
• If “ECO MODE” is on, the ECO MODE ( ) icon will appear at the
bottom right corner of the screen when you turn on the projection TV or
when you press on the remote. (See pages 13 and 14)
To return to the normal screen
Press MENU.
Tip
• For details on the menu system and how to use the menu, see
“Introducing the menu system” on page 30.
Select
“WIDE MODE”
“ECO MODE”
“GAME MODE”
To
change the size of the picture when receiving wide-mode (16:9)
picture signal.
Move up or down to select “ON”, then press .
To restore the normal picture size, select “OFF” then press .
reduce power consumption of your projection TV to save energy.
Move up or down to select “ON”, then press .
To cancel, select “OFF”, then press .
adjust the picture setting that is suitable to view video games.
Move up or down to select “ON”, then press .
To cancel, select “OFF”, then press .