Filter
Top Products
11
Using Your New projection TV
Using Your New Projection TV
Connecting optional components
You can connect optional audio/video components, such as a VCR,
a DTV (Digital Television) receiver, multi disc player, camcorder,
video game, or stereo system. To watch and oprate the connected
equipment, see pages 17 and 31.
Connecting a camcorder/video game equipment
using t 4 (video input 4) jacks
Notes
• When connecting video game equipment, display the “Setup” menu and
select “On” for “Game Mode” to adjust the picture setting that is suitable
for video games (see page 46).
•You can also connect video equipment to the t 1, 2, or 3 (video input)
jacks at the rear of your projection TV.
• When you connect video equipment to the S video input, display the
“Setup” menu and select “Auto” for “S Input” (see page 47). If the signals
are input to both (S video input) and (video input), the S video
signal is automatically selected. To view the video signal input to
(video input), select “Off” for “S Input”.
L(MONO)
R
4
continued
: Signal flow
To S video
output
Camcorder
Video game
equipment
To
(S video input)
or
Audio/Video cable (not supplied)
S video cable (not supplied)
To video and
audio outputs
Front of projection TV
To t 4 (video input)
(yellow)
-L (MONO) (white)
-R (red)
L(MONO)
R
4
To open the drop-
down panel of your
projection TV, push
it up until you hear
a click, then it will
slide down.