Filter
Top Products
7
Connections
KV-20FS120/KV-24FS120
4-101-452-22(1)
Connecting Additional Equipment
Connecting a TV and VCR
1 Connect the coaxial cable from your TV antenna or cable service to the IN jack on your
VCR.
2 Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF
jack on the TV.
Optional connection
❏ If your VCR is equipped with video outputs, you can get better picture quality by
connecting Audio/Video cables (not supplied) from AUDIO and VIDEO OUT on your
VCR to AUDIO/VIDEO IN on your TV.
❏ For better picture quality, use S VIDEO instead of the yellow Audio/Video cable.
S VIDEO does not provide sound; the audio cables must still be connected.
✍ To watch video programs from your VCR, tune your TV to channel 3 or 4 (as set on the rear of your
VCR).
✍ S VIDEO is only for KV-24FS120 model.
✍ You can use the button to switch between the VHF/UHF and VIDEO inputs.
Optional connection
From
VCR
2
Rear of TV
cable/
1
antenna
Video (yellow)
Audio L (white)
Audio R (red)