Sony KV-28CL11B Flat Panel Television User Manual


 
5
GB
Overview of the remote control
Overview
1 To temporarily switch off the TV: Press to temporarily switch off the
TV (the standby indicator on the TV lights up). Press again to switch
on the TV from standby mode. To save energy we recommend
switching off completely when the TV is not in use.
Note:
After 15 minutes without a signal and without any button being
pressed, the TV switches automatically into standby mode.
2 Selecting input source: Press repeatedly until the desired input symbol
of the source appears on the TV screen.
3 Selecting channels: Press to select channels. For double-digit
programme numbers, enter the second digit within 2.5 seconds, or press
-/-- and then the first and second digit. If you enter an incorrect first
digit, this should be corrected by entering another digit (0-9) and then
selecting the -/-- button again to enter the programme number of your
choice.
4 Back to the channel last watched: Press to watch the last channel
selected (watched for at least 5 seconds).
5 This button only works in Teletext mode.
6 This button only works in Teletext mode.
7 Selecting Teletext: Press to switch on teletext.
8 Menu selection
When MENU is switched on:
Scroll Down.
Scroll Up.
Previous menu or selection.
Next menu or OK confirms your selection.
When MENU is switched off:
OK shows a channel overview. Press
or to select the channel,
then press the OK button to watch the selected channel.
9 Selecting Screen format: Press repeatedly to change the format of the
screen. For more details, refer to the chapter “Auto Format” on page 15.
For KV-29CL11B model : Press to view programmes in 16:9 mode.
Press again to return to 4:3 mode.
0 Selecting channels: Press to select the next or previous channel.
qa Muting the Sound: Press to mute the TV sound. Press again to restore
the sound.
qs Adjusting TV volume: Press to adjust the volume of the TV.
qd Displaying the menu system: Press to display the menu on the TV
screen. Press again to remove the menu display from the TV screen.
qf Selecting TV mode: Press to switch off teletext or video input.
qg Selecting sound mode: Press repeatedly to change the sound mode.
qh Selecting picture mode: Press repeatedly to change the picture mode.
qj Displaying on Screen information: Press to display all the on-screen
indications. Press again to cancel.
1
2
5
4
6
8
9
0
3
7
qs
qa
qj
qf
qh
qg
qd
2829cl11b03gb.fm Page 5 Friday, January 23, 2004 4:52 PM