Filter
Top Products
15
GB
Menu System
AUTO FORMAT (for KV-28CL11B only)
The “Auto Format” option in the “Detail Set Up”
menu allows you to automatically change the aspect
ratio of the screen.
To do this: after selecting the option, press . Then
press or to select On (if you wish the TV set
to automatically switch the screen format according
to the broadcast signal) or Off (if you wish to keep
your preference). Finally press OK to store.
Even if you have selected “On” or “Off” in the “Auto
Format” option, you can always modify the format of
the screen by pressing
repeatedly on the remote
control to select one of the following formats:
Smart: Imitation of wide screen effect for 4:3
broadcast.
4:3: Conventional 4:3 picture size, full picture
information.
14:9: Compromise between 4:3 and 16:9 picture
size.
Zoom: Widescreen format for letterbox movies.
Wide: For 16:9 broadcast. Full picture
information.
Note: In “Smart”, “Zoom” and “14:9” modes, parts
of the top and bottom of the screen are cut off. Press
or to adjust the position of the image on the
screen (e.g. to read subtitles).
NOISE REDUCTION
The “Noise Reduction” option in the “Detail Set Up”
menu allows you to automatically reduce the picture
noise visible in the broadcast signal.
To do this: after selecting the option, press . Then
press or to select Auto. Finally press OK to
confirm and store.
To cancel this function afterwards, select “Off”
instead of “Auto” in the step above.
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
4:3
Zoom
14:9
Wide
Smart
2829cl11b03gb.fm Page 15 Friday, January 23, 2004 4:52 PM