Filter
Top Products
32
V SIZE
V POS
V LIN
H SIZE
H PIN CUSH
H TILT
H UP COR
H LOWER COR
AFC V BOW
AFC V ANGLE
H POS
DEFLECTION SYSTEM ADJUSTMENT
1. Enter into the service mode and select ‘Deflection ’. The
‘Deflect ’ adjustment menu will be displayed.
2. Select and adjust each item to obtain the optimum image.
4-2.VOLUME ELECTRICAL ADJUSTMENTS
Sub Colour Adjustment
1. Input a PAL colour bar signal.
2. Connect an oscilloscope to CN5400 pin 5 on the C board.
3. Enter into the ‘SERVICE MODE’.
4. Choose ‘Backend’.
5. Adjust Sub Colour data so that the right sides of the
waveforms are of equal height.
Same Level
B-Out Waveform
www.ELEKO.de