Sony KV-32XBR450 CRT Television User Manual


 
Installing the TV
12
To set up your TV to use both a Cable Box and a direct-connect CATV cable:
1 Connect the Cable TV cable to the TVs VHF/UHF jack.
2 Using a coaxial cable, connect the TVs TO CONVERTER jack to
the cable boxs IN jack. The TVs internal converter allows you to
switch between unscrambled signals coming straight into the TV
and scrambled signals coming in through the cable box,
eliminating the need for an external splitter.
3 Using a coaxial cable, connect the cable boxs OUT jack to the
TVs AUX jack.
To switch between channels from Cable Box and channels coming directly into TV
Press the ANT button on the TV remote control.
To use the TV remote control to switch channels on the cable box
Program the remote control as necessary. (See Programming the
Remote Control on page 50.)
To use the cable box
Have your TV tuner set to channel 3 or 4 (as appropriate) and
then use the Cable Box to change channels.
To prevent the accidental switching of TV channels
When using the VCR or Cable Box, you can use the Channel Fix
feature to lock in a channel. The Channel Fix feature is under the
Channel menu. (See Using the Channel Menu on page 40.)
OUT
75-ohm coaxial cable (not supplied)
IN
AUX
TO CONVERTER
VHF/UHF
CATV cable (unscrambled channels)
Cable box
Signal
Rear of TV