Sony KV-36XBR450 CRT Television User Manual


 
Introducing the FD Trinitron Wega
4
The following table describes the buttons on the remote control that
are for more advanced functions.
Button Descriptions
Button Description
1 MUTING Press to mute the sound. Press again or press VOL + to
restore the sound.
2 SLEEP Press repeatedly until the TV displays the time in
minutes (15, 30, 45, 60, or 90) that you want the TV to
remain on before shutting off automatically. Cancel
by pressing until SLEEP OFF appears. While Sleep
feature is set, press once to view remaining time.
3 DISPLAY Press once to display the current time and channel
label (if set) and channel number. Press again to turn
Display off. See page 46 for details on setting the time.
4 ANT Changes between the VHF/UHF input to the AUX
input.
5 JUMP Press to jump back and forth between two channels.
The TV alternates between the current channel and
the last channel that was selected.
6 DRC/
CINEMOTION
For high quality sources (i.e., DVD player, Satellite
Receiver), this button cycles through the available
high-resolution picture modes: Interlaced, Progressive,
Cinemotion. Also available in the Video menu. For
details, see Selecting Video Options on page 36.
7 PIC MODE Cycles through the available video picture modes:
Vivid, Standard, Movie, Pro. Also available in the Video
menu. For details, see Selecting Video Options on
page 36.
8 MENU Press to display the TV on-screen menu. Press again
to exit from the menus.
9 VOL +/- Adjusts the volume.
q; Joystick allows for movement of the on-screen cursor.
Pressing down on the center of the joystick selects the
item.
qa GUIDE Displays the satellite program guide.
qs RESET Press when in a menu to reset the settings to the
factory defaults.
qd POWER buttons
(GREEN)
Turn on and off the TV and SAT/CABLE equipment
you have programmed into the remote control. For
instructions, see Programming the Remote Control
on page 50.
qf FUNCTION
buttons
Select the equipment (TV or SAT/CABLE) that you
want to operate. The indicator lights up momentarily
when pushed to show which device the remote
control is operating.
1
4
9
q;
qd
qg
qh
ql
w;
3
5
D
R
C
/
C
I
N
E
M
O
T
I
O
N
7
qa
6
8
qf
qj
qk
qs
2
To scan rapidly through the
channels, press and hold down the
CH+ or CH- button.
z