Sony KV-36XBR450 CRT Television User Manual


 
Installing the TV
13
Cable Box Only
Use this hookup if:
You subscribe to a cable TV system that uses scrambled or
encoded signals requiring a cable box to view all channels, and
You do not intend to hook up any other audio or video
equipment to your TV.
When all channels are routed through your cable box, only one
unscrambled signal is sent to the TV, so you cannot use the Twin
View feature. If some channels are scrambled, but others are not,
consider using the hookup on page 12 instead.
1 Connect the coaxial connector from your cable service to the
cable boxs IN jack.
2 Using a coaxial cable, connect the cable boxs OUT jack to the
TVs VHF/UHF jack.
To use the cable box
Have the TV tuner set to channel 3 or 4 (as appropriate) and then
use the cable box to change channels.
To use the TV remote control to switch channels on the cable box
Program the remote control as necessary. For details, see
Programming the Remote Control on page 50.
To prevent accidental switching of TV channels
Use the Channel Fix feature to lock in a channel. The Channel Fix
feature is under the Channel menu. For details, see Using the
Channel Menu on page 40.
1
2
Rear of TV
OUT
Cable box
IN
CATV cable
VHF/UHF