Sony KV-BZ212 CRT Television User Manual


 
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
6
d) If you wish to edit the channels, press
to change to edit mode.
Press b until the mode that you wish to edit
is highlighted: Label, Skip,
(block symbol).
Then press
.
1) To label, press V or v to select the
alphanumeric characters for the label.
Then press
.
2) To skip the program number, press V or v to
select On. Then press
.
You can skip this program number when
using PROG +/-.
3) To block unwanted program number,
press V or v to select
. Then press .
e) Repeat step b) to d) if you wish to change other
channels.
Press WEGA GATE to go to the next menu.
4
Press B or b to adjust the bars on the top and
bottom of the menu if they are slanted, then
press
(KV-BZ212M81 only).
If no adjustment is necessary, then press
.
5
To prevent this “Initial Setup” menu from
appearing again when you turn on the TV
by pressing !, press V or v to select “No”,
then press
.
To allow this menu to appear again, select
Yes, then press
.
Tip
You can immediately go to the end of the Initial Setup menu by pressing WEGA GATE.
End
Select
Confirm
Select
Confirm
Exit
Select
Confirm
Exit
Select
Confirm
Exit
Select
Confirm
Setting up your TV (“Initial Setup”) (continued)
01GB04INS-SOEMME.p65 3/6/06, 11:23 PM6
Black