– 7 –
KV-G21L3
RM-883
Getting Started
9
-EN
If you are not satisfied with the picture
and sound quality
You may be able to further improve the picture and
sound quality by using fine tuning as below:
1 Select the program position you want to
adjust.
2
Press SELECT until
“MANUAL PROGRAM
”
appears on the screen.
3 Press + or – on the remote commander
once.
4 Press DISP until
“FINE” appears on the
screen.
5 Press + or – continuously until you are
satisfied with the picture and sound
quality.
6
Press SELECT to return to normal screen.
Getting Started
-EN
8
Presetting channels automatically
using the remote commander
1 Press POWER to turn on the TV.
When the TV is turned on in standby mode, press
POWER on the remote commander.
2 Press SELECT until
“TV SYSTEM” appears
(KV-J21MF3 only).
3 Press + or – to select your local TV system
(KV-J21MF3 only).
4 Press SELECT until
“AUTO PROGRAM
”
appears.
5 Press + or – .
6 Press + or – .
Presetting channels manually using the
remote commander
1 Press SELECT until
“TV SYSTEM” appears
(KV-J21MF3 only).
2
Press + or – to select your local TV system
(KV-J21MF3 only).
3 Press PROGR +/
– or a number button until
the required program appears on the
screen.
4 Press SELECT until
“MANUAL PROGRAM
”
appears.
5 Press + or – .
6 Press + or – .
The selected channel appears on the screen.
7 Press SELECT to return to normal screen.
+ or –
SELECT
POWER
1
2
3
1
SELECT
TV SYSTEM : B/G
SELECT
AUTO PROGRAM
B/G I D/K M
VHF LOW B/G
SELECT
TV SYSTEM : B/G
B/G I D/K M
or
1
2
3
4
6
7
8
9
÷
0
5
PROGR
JUMP
1
SELECT
MANUAL PROGRAM
VHF LOW B/G
SELECT