Filter
Top Products
Getting Started
11
GB
Manual Fine-Tuning
Normally, the automatic fine-tuning (AFT) is already working. However, if
the picture of a programme is distorted, you can use the manual fine-
tuning function to obtain better picture reception.
1 Press MENU to display the main menu.
2 Move the cursor (z) to “PROGRAMME PRESET” with + ◊ or – √ and press
OK.
The PROGRAMME PRESET menu appears.
3 Move the cursor (z) to “MANUAL PROGRAMME” with + ◊ or – √ and
press OK.
The MANUAL PROGRAMME menu appears.
4 Using + ◊ or – √, move the cursor (z) to the programme position which
you want to manually fine-tune.
5 Press OK repeatedly until the AFT position turns red, then press + ◊ or – √
to select OFF.
6 Press OK.
The tuning bar turns red.
While holding down + ◊ or – √, the tuning bar flashes red and green by
turns, and the channel is fine-tuned. When the best TV reception is found,
release + ◊ or – √.
7 Press OK.
The cursor (z) appears. Now the fine-tuned level is stored.
8 Repeat steps 4 to 7 to fine-tune other channels.
9 Press MENU to go back to the original screen.
To reactivate automatic fine-
tuning (AFT)
Repeat from the beginning and
select “ON” in step 5.
ON TIMER
SLEEP
TIMER REC
REC
REW
STOP PAUSE
FFPLAY
COUNTER
RESET
TIMER
ON SCREEN
ON/OFF
CLEAR
MENU
OK
123
456
789
-/--
0
PROGR
TIMER
QUICK
OK
MANUAL PROGRAMME
PROG
Sapelect nd ress
SYS BAND
0V––––
LABEL AFT
1
2
BG/
B/G
L
V–H
UHF
–– ON
––––– ON
––––– ON
B/G