Filter
Top Products
Basic Operations
20
GB
ON TIMER
SLEEP
ONCE
DAILY
WEEKLY
PROGR
REC
PAUSE
CLEAR
TIMER ON
SCREEN
QUICK
TIMER
COUNTER
RESET
TIMER REC
ON/OFF
OK
REW FF
STOP
PLAY
MENU
SHOW VIEW
12
3
45
6
78
9
0
TV stations broadcast an information service called Teletext via the TV
channels. The teletext service allows you to receive various information
such as weather forecasts or news at any time.
Switching Teletext on and off
1 Select the TV channel which carries the Teletext service you want to watch.
2 Press V to display Teletext.
A Teletext page (normally the index page) is displayed. If there is no
Teletext broadcast, the indication P100 is displayed on a black screen.
3 Press the number buttons to enter the three-digit of the Teletext number
you want.
The numbers are displayed on the screen and the requested page appears
in a few seconds.
If you have made a mistake, type in any three digits, then re-enter the
correct page number.
4 Press ; to return to the TV mode.
Using Fasttext
This feature allows you to access a Teletext page with one button press.
When a Fasttext page is broadcast, a colour-coded menu appears at the
bottom of the screen. The colours of the menu correspond to the red,
green, yellow and blue buttons on the Remote Commander. These
coloured buttons functions as the fasttext buttons in Teletext mode.
Press the coloured button which corresponds to the colour-coded menu.
The page is displayed after a few seconds.
Viewing Teletext
To change the teletext channel
• First press ; to return to the TV
mode, then repeat steps 1 to 3.
• If the signal of a TV channel is
weak, teletext errors may occur.