Filter
Top Products
41
Additional Information
GB
Function
Recording
Timer
recording
Others
Possible causes and remedies
• The safety tab of the cassette has been removed.
/ Cover the tab hole with adhesive tape, or use another cassette
with a safety tab. (page 22)
• No cassette has been inserted.
/ Insert a cassette with the safety tab.
• The tape is at its end.
/ Rewind the tape.
• The clock has not been set.
/ Set the current time and date. (page 15)
• You have made a mistake when setting the timer.
/ Check the setting steps. (pages 26 to 28)
• The safety tab of the cassette has been removed.
/ Cover the tab hole with adhesive tape, or use another cassette
with a safety tab.
• No cassette has been inserted.
/ Insert a cassette with its safety tab.
• The tape is at its end.
/ Rewind the tape.
• No setting is made for timer recording.
/ Set the programme for timer recording. (pages 26 to 28)
• You did not press TIMER REC ON/OFF.
• There has been a power interruption lasting more than a week.
• Another cassette is already inserted.
/ Press 6 to eject the cassette.
• The batteries are low.
/ Replace the batteries. (page 4)
• The batteries are installed incorrectly.
/ Install the batteries with correct polarities. (page 4)
Problems
The cassette is ejected
when you press REC
r .
Recording cannot be
done.
Timer settings cannot
be made.
The cassette is ejected
when you press
TIMER REC ON/
OFF.
The TIMER REC lamp
does not light up
even though you
press TIMER REC
ON/OFF.
Timer recording was
not made.
A cassette cannot be
inserted.
The Remote
Commander does not
work.