Filter
Top Products
77
Starting the playback
quickly (Quick Mode)
The recorder is factory set to quickly start
playback after the playback button is
pressed.
You can check the setting as follows.
1 While the recorder is stopped or
playing, enter the menu and select
“Option” - “QuickMode”.
2 Slide the jog lever repeatedly until
“Quick On” appears in the display,
and then press the jog lever to enter
the selection.
If you will not use the recorder
for a long time
Select “Quick Off” in step 2.
You can minimize battery drain while the
recorder is not being used.
When the quick mode is set to “Quick On”, the
power remains on within the recorder even
when nothing appears in the display. When the
rechargeable battery becomes completely
drained, the internal power supply of the
recorder turns off automatically.
1 Enter the menu and select “Option” -
“QuickMode”.
2 Turn the jog dial until “Quick On”
appears in the display, and then press
NENT to enter the selection.
Note
DISPLAY
Jog lever
On the recorder
5-way control key
(NENT)
NAVI/MENU
Jog dial