Filter
Top Products
Adjustment Using the Menus
28
About retaining the settings
The settings are automatically stored in the monitor
memory.
To reset items being adjusted
Press the RESET button while the new menu item is
being selected and adjusted. Any changes to this new
item setting is ignored and the item is reset to the
previous setting.
Adjustment Using the
Menus
Items
The screen menu of this monitor consists of the
following items.
1) The items on the STATUS menu indicate the current settings.
2) for the PVM-14L2/PVM-20L2 only
3) CAPTION is available only when the Caption Vision (Closed Caption)
Decoder has been installed.
4)The items on the OPTION CONFIG menu differ depending on the
optional board installed.
Adjusting and Changing the
Settings
STATUS menu
The STATUS menu is used to display the current status
of the monitor.
COLOR TEMP/BAL menu
The COLOR TEMP/BAL menu is used for adjusting the
picture white balance.
You need to use a measurement instrument to adjust the
white balance.
STATUS
1)
USER CONTROL
AUTO CHROMA/PHASE
SUB CONTROL
USER CONFIG
RGB/COMP SEL
2)
COMP LEVEL
NTSC SETUP
FORMAT DISP
LANGUAGE
DEGAUSS DELAY
CAPTION
3)
REMOTE 1 PIN
2 PIN
3 PIN
4 PIN
6 PIN
7 PIN
8 PIN
OPTION CONFIG
4)
COLOR TEMP/BAL
COLOR TEMP
MANUAL ADJ
Submenu Setting
FORMAT Display only
COLOR TEMP Display only
COMP LEVEL Display only
NTSC SETUP Display only
RGB/COMP SEL Display only (for the PVM-14L2/
PVM-20L2 only)
OPTION Display only
Submenu Setting
COLOR TEMP Select the color temperature from
among D65, D93 and USER
setting.
MANUAL ADJ If you set COLOR TEMP to USER,
the item displayed is changed from
blue to white, which means you can
adjust the color temperature.
• ADJUST GAIN...: Adjusts the
color balance (GAIN).
• ADJUST BIAS...: Adjusts the
color balance (BIAS).
• COPY FROM: If you select
D65 or D93 with the M/+ or
m/– button, the white
balance data of the selected
color temperature will be
copied to USER.