Filter
Top Products
36
The following items can be set (follow the page
reference for details):
“
z” indicates the default settings.
SET (Setup)
DSPL (Display)
P/M (Play Mode)
SND (Sound)
EDIT
*1 When the unit is turned off.
*2 The default setting differs, depending on the
model:
PAL: Asian model
NTSC: Latin American model
*3 MEX-R5 only.
*4 When the illumination control lead is connected.
*5 When the unit is turned on.
*6 When a disc is played back.
*7 When auxiliary equipment is connected and
played.
CLOCK-ADJ (Clock Adjust) (page 8)
BEEP
To set “ON” (z) or “OFF.”
RM (Rotary Commander)
To change the operative direction of the rotary
commander controls.
–“NORM” (
z): to use the rotary commander in
the factory-set position.
–“REV”: when you mount the rotary
commander on the right side of the steering
column.
AUX-A*
1
(AUX Audio)
To turn the AUX source display “ON” (
z) or
“OFF” (page 38).
PAL/NTSC*
1
*
2
To change the TV colour system to PAL or
NTSC.
WL*
1
*
3
(Wireless)
–“CH1” (
z), “CH2,” “CH3,” “CH4”: to avoid
interference with the wireless transmission.
–“OFF”: to turn off the wireless transmission.
CLOCK (Clock Information)
To display the clock and the display items at the
same time.
–“ON”: to display at the same time.
–“OFF” (
z): to not display at the same time.
DIM (Dimmer)
To change the brightness of the display.
–“AT” (
z): to dim the display automatically
when you turn the lights on.*
4
–“ON”: to dim the display.
–“OFF”: to deactivate the dimmer.
CONTRAST
To adjust the contrast of the main unit display.
The contrast level is adjustable in 7 steps.
M.DSPL*
5
(Motion Display)
To select the Motion Display mode.
–“SA” (
z): to show moving patterns and
spectrum analyzer.
–“ON”: to show moving patterns.
–“OFF”: to deactivate the Motion Display.
DEMO*
1
(Demonstration)
To set “ON” (
z) or “OFF” (page 8).
A.SCRL (Auto Scroll)
To scroll long displayed items automatically
when the disc/album is changed.
–“ON”: to scroll.
–“OFF” (
z): to not scroll.
LOCAL (Local seek mode)
–“ON”: to only tune into stations with stronger
signals.
–“OFF” (
z): to tune normal reception.
MONO (Monaural mode)
To improve poor FM reception, select monaural
reception mode.
–“ON”: to hear stereo broadcasts in monaural.
–“OFF” (
z): to hear stereo broadcast in stereo.
EQ7 TUNE (page 34)
HPF (High Pass Filter)
To select the front/rear speaker cut-off
frequency: “OFF” (
z), “78HZ” or “125HZ.”
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency:
“OFF” (
z), “125HZ” or “78HZ.”
LOUD (Loudness)
To enhance bass and treble at lower volume.
–“ON”: to reinforce bass and treble.
–“OFF” (
z): to not reinforce bass and treble.
DVD LVL*
6
(DVD level) (page 23)
To set the audio output level according to the
recorded DVD audio format.
AUX LVL*
7
(Auxiliary level)
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources.
NAMEEDIT (page 35)
NAME DEL (page 35)
BTM (page 33)