Sony RDR-DC500 DVD Recorder User Manual


 
104
The BRAVIA Sync features do not
operate.
, Your TV is not compatible with the
BRAVIA Sync features.
, “Control for HDMI” is set to “Off” in the
“System 1” setup (page 87).
, The recorder is connected to the TV via an
amplifier. Connect the recorder directly to
the TV.
The recorder does not operate properly.
, Press the RESET button on the front panel
(page 12). Then, press [/1 to turn on the
recorder.
, When static electricity, etc., causes the
recorder to operate abnormally, turn off the
recorder and wait until the clock appears in
the front panel display. Then, unplug the
recorder and after leaving it off for a while,
plug it in again.
The disc tray does not open after you
press Z (open/close).
, It may take a few seconds for the disc tray
to open after you have dubbed or edited a
DVD. This is because the recorder is
adding disc data to the disc.
, The recorder is locked. Cancel the Child
Lock (page 54).
, Depending on the disc, the recorder checks
whether the disc is finalised when the disc
is removed from the recorder.
The disc tray does not open and you
cannot remove the disc after you press Z
(open/close).
, Turn off the recorder. Once the clock
appears in the front panel display,
disconnect the mains lead. (If the recorder
does not turn off or if the clock does not
appear in the front panel display,
disconnect the mains lead anyway.)
Connect the mains lead again while
pressing down Z on the recorder, and
release the button when the disc tray opens.
“REPAIR ERR” appears in the front panel
display.
, The recorder’s repair function is activated
to repair the hard disk drive or disc. Leave
the recorder on until “REPAIR ERR”
disappears from the front panel display.
Some data may be lost even if the repair
function is activated.
“E01” appears in the front panel display.
, There is a problem in the HDD. Contact
your nearest Sony dealer. Note that
contents on the HDD may be erased when
servicing this unit.
“E02” appears in the front panel display.
, The HDD information is incorrect. You
cannot make a new recording to the HDD.
Format the HDD following the instructions
of “Format” in “HDD Formatting”
(page 82). Note that all of the recorded
contents on the HDD will be erased. If this
does not fix the problem, contact your
nearest Sony dealer.
“UPDATE” appears in the front panel
display.
, The recorder is updating the EPG and other
information.
The Parental Lock does not work.
, Check the “D.TV Age Limit” setting in the
“Parental Lock” setup (page 96).
Mechanical sounds are heard when the
recorder is off.
, While the recorder is updating the EPG
and other information, operating noises
(such as the internal fan) may be heard,
even when the power is off. This is not a
malfunction.
The recorder turns off suddenly while
operating.
, The recorder automatically turns off when
it detects any problem. Contact your
nearest Sony dealer.