Sony RDR-VX521 DVD VCR Combo User Manual


 
92
1 Press DVD to operate the DVD recorder.
2 Insert a disc.
3 Press SYSTEM MENU while the recorder is
in stop mode.
The System Menu appears.
4 Select “Disc Setting,” and press ENTER.
The “Disc Setting” display appears.
5 Select “Disc Finalize,” and press ENTER.
The display asks for confirmation.
6 Select “Finalize,” and press ENTER.
The display asks for confirmation again.
7 Select “OK,” and press ENTER.
The recorder starts finalizing the disc.
To turn off the display
Press SYSTEM MENU.
To unfinalize a DVD-RW (VR mode)
If you cannot record or edit on a DVD-RW (VR
mode) that has been finalized, unfinalize the disc
by selecting “Unfinalize” in step 6 above.
z Hints
You can check whether the disc has been finalized or
not. If you cannot select “Finalize” in step 6 above, the
disc has already been finalized.
To check the disc information, select “Disc
Information” in the “Disc Setting” display and press
ENTER. See page 70 for details.
Notes
Depending on the condition of the disc, the recording,
or the DVD equipment, discs may not play even if the
discs are finalized.
The recorder may not be able to finalize a disc if it was
recorded on another recorder.
SYSTEM
MENU
DVD
M/m/</,,
ENTER
Disc Setting
10:10 AM
Disc Name :
Disc Protect : Not Protected
Disc Format : VR Mode
Disc Finalize : Unfinalized
Disc Information
Erase All Titles
Setup
Disc Setting
Edit
Title List
Timer
Dubbing
Do you want to finalize this disc ?
UnfinalizeFinalize
Disc will be finalized.
Do you want to continue ?
CancelOK