Filter
Top Products
Using the lists
masterpage:Right
filename[\\Nas-data-server\SONY Current jobs\SONY RM-
LJ312\DTP\4247235111\424723511RMLJ312U\GB04ADV_RM-LJ312-U.fm]
23
GB
model name1[RM-LJ312]
[4-247-235-11(1)]
To download CD disc names (memos)
and information on the presence or
absence of a CD in each slot of a CD
changer
This function is available only when the CD
player is set to “CD2” or “CD3” in the IR
SET menu. When the CD player is set to
“CD1”, “CD DISC NAME” does not
appear.
1 Move the easy scroll key to select “CD
DISC NAME” then press the key to enter
the selection.
The SORT list appears in the display.
2 Move the easy scroll key to select
“NUMBER” or “ALPHABET”, then
press the key to enter the selection.
The remote starts to download the data.
To cancel the download process
Move the easy scroll key to select “Exit” from
the DOWNLOAD list, then press the key to
enter the selection.
Tip
When you change the discs in the CD changer, the disc
information (disc names (memos)) is automatically
updated when you start playback. To update without
starting playback, perform the above procedure.
Notes
• You can download the data only from the Sony CD
changer (5, 50, 200, 300, or 400 discs) connected to
the receiver using the CONTROL A1 cable.
• CD DISC NAME is available for up to 400 discs.
Note on downloading CD disc
names from the CD players
(memos)
You can download CD disc names (memos)
only from the CONTROL A1/A1II -compatible
Sony CD players. Depending on the CD player
setting, it may take several minutes to download
CD disc names (memos). For faster
transmission, make the following CD player
settings.
When an CONTROL A1/A1II -
compatible Sony CD player is
connected to the receiver
Set the category in the RM SET UP list for the
CD player to “CD1”. When you connect a Sony
CD changer, set the category in the RM SET UP
list for “CD2” (or “CD3”). Use only one of
“CD1”, “CD2”, or “CD3” for the category. The
current category setting appears when you select
the component from the INPUT SELECTOR
list (page 13).
When multiple CONTROL A1/A1II
-compatible Sony CD players are
connected to the receiver
When you use two CD players, set the
COMMAND MODE selector on the back panel
of the CD players to “CD1” and “CD2”
respectively, and set the category in the IR SET
list to match the corresponding player’s
COMMAND MODE selector position (see
page 16). When you use three CD players, set
the COMMAND MODE selector to “CD1”,
“CD2”, and “CD3” respectively, and set the
category in the IR SET list to match the
corresponding player’s COMMAND MODE
selector position.
When setting category for the CD players, do
not skip the number or select the same number to
the multiple players.
When an CONTROL A1/A1II -
compatible Sony CD player and a
non-compatible Sony CD player
are connected to the receiver
Set the COMMAND MODE selector on the
back panel of the CONTROL A1/A1II-
<Sort? >
cNUMBER
ALPHABET
Exit
<LOADING>
[xxx ]
cCancel
continued