Filter
Top Products
128
Continued
Macro operation using the Timer function
The Program Edit display is the basic setting display to set the Timer Program
key. To program the setting, return to the Program Edit display and press the
[OK] key shown in the upper right of the display after setting with each setting
item tag.
If you do not press the [OK] key in the Program Edit display after setting with
each setting item tag, the setting will not be programmed. Make sure to finish
the setting by pressing the [OK] key in the basic Program Edit display.
Example: To create a new Timer
Program key
Press the [NEW] key in the Program Edit
display.
Set a label in the display for the label setting,
and press the [OK] key.
Press the [OK] key in the Program Edit
display.
m
m
Example: To set the time
Select the [TIME] tag and press the Timer
Program key in the Program Edit
display.
Set the timer execution time, and press
the [OK] key.
Press the [OK] key in the Program Edit
display.
m
m
In addition to the label setting above, when setting with each setting item tag,
press the [OK] key in the Program Edit display at last to decide the setting
contents.