Filter
Top Products
81
Customizing the Display
■ To create a Component key without programming a
preset code of a component
Select “NONE” from the AV component list in the display and then go to step 6.
5
Select a method to program
a preset code (PRESET) for
the Component key, and
then program a preset code.
For details on programming of a preset
code, see “Programming the preset codes
of components (PRESET)” (page 42).
6
Set the skin for the
Component key.
Select the normal skin, and press the
[OK] key. Then select the pressed skin,
and press the [OK] key.
For details on setting the skin, see step 5
in “Setting the skin (key appearance and
color) and the label (name) of the
Component key (SKIN/LABEL)” (pages
74 - 76).
7
Set the label for the
Component key.
When the label setting is complete, press
the [OK] key.
For details on setting the label, see step 6
in “Setting the skin (key appearance and
color) and the label (name) of the
Component key (SKIN/LABEL)” (pages
74 - 76).
Note
You cannot set the same label name as an existing Component key, regardless of
whether characters are upper or lowercase. If you try to set the same label name, a
message appears.
8
After confirming that the
newly created Component
key is displayed, press the
[OK] key.
Creation of the Component key is
complete and the display returns to step 4.
If you press the [CANCEL] key, the
display returns to step 7.
Continued