Filter
Top Products
Startup Guide
This guide shows you how to set the Remote Commander to operate your components.
First, find the four-digit component code number for your component, referring to the supplied
“Component code numbers.”
Example: To set up a TV of the code
number “8011”
1 Set the Remote Commander for code
input mode.
2 Press the desired Component Select
button.
3 Enter the code number.
4 Finish setting.
SET
MENU
+
Press SET and MENU.
SET
SATDVDTV CBL
TAPE
CDVCR AMP
ENT
Press ENT.
You can search for the component code
available for your component.
1 Set the Remote Commander for code
input mode.
2 Press the desired Component Select
button.
3 Transmit code number signals in turn.
4 Finish setting.
SET
MENU
+
Press SET and MENU.
SET
SATDVDTV CBL
TAPE
CDVCR AMP
PROGRAM
1
ENT
Press ENT.
8 0 1 1
For more details, see page 10.
Press PROGRAM + or PROGRAM –, and
then 1. Repeat until your component
reacts.
If you have the code number If you cannot find the code
number
For more details, see page 8.
3
Continued