Filter
Top Products
6
Hookup C (for SA-VE502/VE302)
This configuration is used when the amplifier is connected to a CD player, MD deck, cassette
deck, or other audio devices.
eEEe
Ee Ee
FRONT
R
L
R
L
SPEAKER
IN
SPEAKER
OUT
e
e
E
E
RL
Terminal connections
E
e
E
e
E
e
E
e
Notes
•Make sure the plus (+) and the minus (–) terminals on the speakers are matched to the corresponding the plus
(+) and the minus (–) terminals on the amplifier.
•Be sure to tighten the screws of the speaker terminals securely since loose screws may become a source of
noise.
•Make sure all connections are firm. Contact between bear speaker wires at the speaker terminals may cause a
short-circuit.
•Do not connect the subwoofer to the amplifier’s CENTER output terminal (which is for Dolby Pro Logic or
Dolby Digital (AC-3)). No bass will output from the subwoofer if you do.
•For details regarding the connections on the amplifier side, refer to the manual that was provided with your
amplifier.
Tip
It is convenient to remember that all striped wires are minus (–) in polarity and should be connected to the
minus (–) speaker terminals.
Hooking up the system (continued)
Front (Right)
Subwoofer
Front (Left)
Amplifier