Filter
Top Products
20
Presetting channels
If the picture is not clear
If the picture is not clear, you may use the Manual Fine Tuning (REGL.FIN)
function. After step 7, press V/v to select “REGL.FIN”. Press B/b to get a clear
picture. Then press ENTER.
Tips
• To set the programme position for the decoder, see “Setting the Canal Plus decoder” on
page 27.
• The DVD-VCR must receive channel information for station names to appear automatically.
Note
• When adjusting REGL.FIN, the menu may become difficult to read due to interference from
the picture being received.
9
Enter the station name.
1 Press V/v to select a character.
Each time you press V, the character
changes as shown below.
A t B t … t Z t 0 t 1 t … t 9
t A
2 Press b to set the next character.
The next space flashes.
To correct a character, press B/b until the character you want to correct
flashes, then reset it.
You can set up to 4 characters for the station name.
10
Press ENTER to confirm the station name.
11
Press O RETURN, then press SET UP to exit the menu.
ENTER
RETURN
ENTER
PR
REGL.FIN
CANAL
DECODEUR
NOM
: 5
SYS. : L / L’
: NON
RECHERCHE MANUELLE
MEMOIRE :
: 033
: –
: O – – –
V
v
B
b
ENTER
RETURN
SET UP