Filter
Top Products
42
Basic Operations
Recording TV programmes using the
G-CODE
®
system (SLV-ED929MI only)
The G-CODE system is the feature that simplifies programming the VCR to make
timer recordings. Just enter the G-code number listed in the TV programme guide.
The date, times, and programme position of that programme are set automatically.
You can preset a total of eight programmes, including settings made with other timer
methods.
Before you start…
• Check that the VCR clock is set to the correct time and date.
• Insert a tape with its safety tab in place. Make sure the tape is longer than the total
recording time.
• Turn on your TV and set it to the video channel.
• Refer to “Index to parts and controls” for button locations.
1 Press the G-CODE button.
The G-CODE menu appears on the
TV screen.
2 Press the programme number
buttons to enter the G-code number.
If you make a mistake, press
CLEAR and re-enter the correct
number.
123
456
789
0
CLEAR
MENU:OK:SET
CODE 0– 9
G-CODE
CODE –––––––––
:
EXIT
G-CODE
MENU:OK:SET
CODE 0– 9
G-CODE
CODE 1234–––––
:
EXIT