Filter
Top Products
45
Recording TV programmes using the Dial Timer (SLV-SE830B only)
Basic Operations
To set the clock
Tips
• To cancel a Dial Timer setting, press x (stop) on the VCR while you are making
the setting.
• The programme is recorded in the current tape speed mode. To change the tape
speed, press SP/LP before you complete the setting in step 9.
• To check, change, or cancel the programme setting, see “Checking/changing/
cancelling timer settings” on page 57.
Notes
• If eight programmes have already been set using the ShowView system or the
MINUTERIE menu, “FULL” appears in the display window for about five
seconds.
• The indicator flashes in the display window when you complete the setting in
step 9 with no tape inserted.
• If you set the clock using the Auto Clock Set function and HORLOGE AUTO is
set to OUI, the clock will adjust itself to the incoming time signal regardless of
adjustments made with the Dial Timer. Be sure you have set the Auto Clock Set
correctly.
• When the time is set incorrectly, “ERROR” appears in the display window in step
9. Set the timer again from step 1.
• You cannot set the tape speed to AUTO using the Dial Timer. To select AUTO, set
the tape speed in the MINUTERIE menu (see page 57).
1
Hold down PROG so that “DAY” appears in the display window.
However, if the clock has already been set, the current setting appears.
2
Turn PROG to set the day.
3
Press PROG.
“MONTH” appears in the display window.
4
Turn and press PROG to set the month, and then the year.
After you set the year, “CLOCK” appears in the display window again.
5
Turn and press PROG to set the hour and minute.
6
When you have finished setting the time, press PROG to start the
clock.
continued