Filter
Top Products
79
Troubleshooting
Additional Information
Others
The selected input line
connector number does
not appear in the
display window.
• Check that DECODER/LINE2 in the OPTIONS-2 menu is
set to LINE2 (see page 73).
The SMARTLINK
function does not work.
• Check that your TV complies with SMARTLINK,
MEGALOGIC, EASYLINK, Q-Link, EURO VIEW LINK,
or T-V LINK.
• Make sure you use the Scart cable to connect the VCR and
your TV.
• Make sure the Scart cable is connected securely.
The tracking meter
does not appear on the
TV screen.
• The recording condition of the tape is very poor and tracking
cannot be adjusted.
• The tracking meter does not appear when playing back an
NTSC-recorded tape.
The display window
becomes dim.
• The display window automatically becomes dim when the
VCR is in standby or timer recording mode.
The VCR needs to be
cleaned.
• Clean the cabinet, panel and controls with a dry, soft cloth, or
a soft cloth slightly moistened with a mild detergent solution.
Do not use any type of solvent, such as alcohol or benzine.
Symptom Remedy
Symptoms caused by contaminated video heads
•Normal picture •Rough picture
initial
contamination
•Unclear picture • No picture (or
black & white
screen appears
)
terminal