Filter
Top Products
Getting Started
19
Connecting the VCR
Additional connections
To a stereo system (not
available on SLV-
SE630D/E and SE230D)
You can improve sound
quality by connecting a
stereo system to the AUDIO
R/D L/G jacks as shown on
the right.
To a satellite or digital
tuner with Line Through
Using the Line Through
function, you can watch
programmes from a satellite
or digital tuner connected to
this VCR on the TV even
when the VCR is turned off.
When you turn on the
satellite or digital tuner, this
VCR automatically sends the
signal from the satellite or
digital tuner to the TV
without turning itself on.
Notes
• The Line Through function will not operate properly if POWER SAVE in the
USER SET menu is set to ECO2. Set POWER SAVE to OFF or ECO1 to ensure
proper operation (see page 67).
• You cannot watch programmes on the TV while recording unless you are recording
a
satellite or digital programme.
• This function may not work with some types of satellite or digital tuners.
• When the VCR is turned off, set the TV to the video channel.
*
1
SLV-SE830D/E
*
2
SLV-SE737E, SX737D, SE730D/E, SX730D/E, SE630D/E and SE230D
1
Connect the satellite or digital tuner to the LINE-3 (DEC/EXT)*
1
or
LINE-2 (DEC/EXT)*
2
connector as shown above.
2
Turn off the VCR.
To watch a programme, turn on the satellite or digital tuner and the TV.
Audio cable (not supplied)
AUDIO R/D L/G
LINE IN
: Signal flow
Scart cable (not supplied)
LINE-3 (DEC/EXT)*
1
or
LINE-2 (DEC/EXT)*
2
LINE
OUT
: Signal flow