Filter
Top Products
71
Connecting to a VCR or stereo system
Editing
Example C
How to connect to a stereo system (SLV-SE830D/E only)
Connect the t LINE-2 L o R jacks on this VCR to the audio output jacks
on the stereo system, using an audio cable (not supplied).
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other
VCR, select the input correctly to prevent a humming noise.
• If the other VCR does not have a Scart (EURO-AV) connector, use an adequate
cable instead and connect the cable to the line out jacks of the other VCR.
• When you connect another VCR to the LINE-3 (DEC/EXT)*
1
or LINE-2 (DEC/
EXT)*
2
connector, press INPUT SELECT to display “L3”*
1
or “L2”*
2
in the
display window.
*
1
SLV-SE830D/E
*
2
SLV-SE737E, SX737D, SE730D/E, SX730D/E, SE630D/E and SE230D
TV
LINE-3 (DEC/EXT)*
1
or
LINE-2 (DEC/EXT)*
2
Scart cable (not supplied)
Scart
(EURO-AV)
: Signal flow
Your VCR (Recorder)
Other VCR (Player)