Filter
Top Products
80
Reducing the VCR’s power consumption
Master Page : Left
filename[010addo.fm] model name1[SLV-SE610A/E] model name2[SLV-SE710D/E]
model name3[SLV-SX710D/E] model name4[SLV-SX717D/E]
model name5[SLV-SE810D/E] model name6[SLV-SX810D]
[3-065-674-E1 (1)]
Reducing the VCR’s power consumption
You can turn off the indicators in the display window when the VCR is off (standby
mode) to reduce the VCR’s power consumption.
To turn on the indicators in the display window
Set POWER SAVE to OFF in step 4.
Notes
• When the VCR stands by for recording, the indicators in the display window
remain lit even when POWER SAVE is set to FULL, PARTIAL, or ON.
• If POWER SAVE is set to FULL*, you cannot watch or record programmes from
your PAY-TV/Canal Plus decoder, satellite, or digital tuner during standby mode
(page 82).
* not available on SLV-SE610A
1
Press MENU, then select OPTIONS and press OK.
2
Press M/m to highlight OPTIONS-2, then press OK.
3
Press M/m to select POWER SAVE, then
press OK.
4
Press M/m to highlight the option, then press OK.
For SLV-SE610E, SE710D/E, SX710D/E, SX717D/E, SE810D/E,
SX810D
• FULL to reduce the power consumption to a minimum
• PARTIAL to reduce the power consumption
For SLV-SE610A
• ON to reduce the power consumption to a minimum
5
Press MENU to return to the original screen.
CONFIRM :
SELECT :
OK
MENUEXIT :
OPTIONS - 2
TIMER OPTIONS
DECODER / LINE3
POWER SAVE
DECODER
FULL
TV DIRECT REC PARTIAL
OFFRR
RETURN