Sony SLV-D271PDVD DVD VCR Combo User Manual


 
18
US
Basic hookups
Plug the DVD-VCR into an AC outlet.
The DVD-VCR automatically presets the DVD-VCR’s clock and TV channels when
the DVD-VCR is plugged into the AC outlet.
The DVD-VCR starts presetting the
clock and channels.
When Auto preset is completed, the
current time appears in the display
window.
You have now completed DVD-VCR setup.
To begin using your DVD-VCR, go to “Basic Operations” on page 34.
To change the on-screen display language to French or Spanish, see
“Step 4 : Selecting a language” on page 20.
The clock is set using a time signal provided by some TV channels. If the clock is
incorrect, or “–:–” appears in the display window, see “Using Manual Clock Set” on
page 24.
To add or disable channels manually, see “Presetting/disabling channels manually”
on page 28.
Notes
If you connect the AC power cord before the antenna connections are completed, the channels
may be incorrectly set. If this happens, see “Step 6 : Presetting channels” on page 26.
Do not press any buttons on the DVD-VCR or remote commander during Auto preset.
Auto preset starts automatically only when you plug in the AC power cord for the first time
after you purchase the DVD-VCR.
Auto preset can be performed by pressing x on the unit
continuously for 5 seconds or more
with the DVD-VCR power turned off.
DVD-VCR setup (Hookup 1 continued)
AC power cord
to AC outlet