Sony SLV-D271PDVD DVD VCR Combo User Manual


 
VCR Additional Operations
93
US
Searching using various functions
Note
Once in recording mode, if the VCR is put in pause and then released to start the recording,
no index mark will be inserted. An index mark will be inserted if the channel is changed
while VCR is put in pause.
4
Scan and Play (To search using the index
function):
1 Press b to scan ahead, or B to scan
backwards.
The VCR searches and then plays back for
about five seconds.
2 Press H PLAY to view the program.
If you do not press H PLAY, the VCR
automatically searches for the next index
mark, or until it reaches the end of the tape.
Go to [0:00:00] (To search for the counter
0:00:00 point):
Press V.
The VCR starts searching and automatically
stops at the 0:00:00 point.
To mark a point on the tape that you want to
find later, press CLEAR to reset the tape
counter to “0:00:00.”
End search (To search for a blank portion of
the tape)
Press v.
The VCR starts searching and automatically
stops at the beginning of a blank space. If no
blank space is found, the VCR reaches the end.