Sony SLV-D500P DVD VCR Combo User Manual


 
Getting Started
15
Basic hookups
Hookup 1 : DVD-VCR setup
Notes
If you connect the AC power cord before the antenna connections are completed, the channels
may be incorrectly set. If this happens, see “Step 6 : Presetting channels” on page 24.
Do not press any buttons on the DVD-VCR or remote commander during Auto preset.
Auto preset starts automatically only when you plug in the AC power cord for the first time
after you purchase the DVD-VCR.
Auto preset can be performed by pressing x STOP on the unit
continuously for 5 seconds or
more with the DVD-VCR power turned off.
Plug the DVD-VCR into an AC outlet.
The DVD-VCR automatically presets the DVD-VCR’s clock and TV channels
when the DVD-VCR is plugged into the AC outlet.
The DVD-VCR starts presetting the
clock and channels.
When Auto preset is completed, the
current time appears in the display
window.
You have now completed DVD-VCR setup.
To change the on-screen display language to French or Spanish, see
“Step 4 : Selecting a language” on page 19.
The clock is set using a time signal provided by some TV channels. If the clock
is incorrect, or “--:--” appears in the display window, see “Using Manual Clock
Set” on page 22.
To add or disable channels manually, see “Presetting/disabling channels
manually” on page 26.
AC power cord
to AC outlet
continued