Sony SLV-D500P DVD VCR Combo User Manual


 
30
Setting up the VCR Plus+
®
system
3
Press V/v to select “Guide channel setup,”
then press ENTER.
4
The upper row shows VCR Plus+ guide channels and the lower row shows
TV channels or cable box out put channels. Press B/b to select the channel
number that does not match the guide channel.
5
If you made Hookup 1 (page 14) or 2 (page 16): Enter the actual number
on your TV (and VCR), then press V/v.
If you made Hookup 3 (page 18): Enter the cable box output channel
(usually 2, 3, or 4), then press V/v.
6
Repeat steps 4 and 5 for each channel number that does not match.
7
Press O RETURN to confirm the setting.
8
Press O RETURN repeatedly to exit the menu.