Filter
Top Products
Getting Started20
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in
channels clearly. If, however, the picture is not clear, you may also use the
manual tuning function.
1 Press PROG +/– or the programme number buttons to select the
programme number for which you cannot obtain a clear picture.
2 Press MENU, then select SETTINGS and press OK.
3 Select TUNER, then press OK.
4 Select FINE TUNING.
The fine tuning meter appears.
5 Press CURSOR ?// to get a clearer picture, then press OK.
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
Note
• The menu disappears automatically if you don’t proceed for more than a few
minutes.
Selected programme
position
Manual setup –– Presetting channels (continued)
PROG 4TUNER
NORMAL / CATV
CHANNEL SET [ ]
C
[]NORM
21
SYSTEM [ ]D / K
AFT [ ]OFF
FINE TUNING
––
––––––
SELECT
SET
:
: