Filter
Top Products
Basic Operations
Basic Operations
23
Enjoying the simulated stereo sound (Virtual Stereo)
When you connect the VCR to a stereo TV or a stereo system, you can use
the Virtual Stereo function to give monaural sources a simulated stereo
effect. To activate this function, press VIRTUAL SOUND. To cancel this
function, press VIRTUAL SOUND again.
Notes
• The counter resets to “0:00:00” whenever a tape is reinserted.
• The counter stops counting when it comes to a portion with no recording.
• The time counter does not appear on the TV screen when using an NTSC-recorded
tape.
• Depending on your TV, the following may occur while playing an NTSC-recorded
tape:
– The picture becomes black and white.
– The picture shakes.
– No picture appears on the TV screen.
– Black streaks appear horizontally on the TV screen.
– The colour density increases or decreases.
• If you play back a tape in LP or EP mode with NTSC system, the sound is heard in
monaural.
To use the time counter
At the point on the tape that you want to find later, press COUNTER RESET.
The counter in the display window resets to “0:00:00.” Search for the point
afterwards by referring to the counter.
To display the counter on the TV screen, press DISPLAY.
VIDEO
SP