Filter
Top Products
Basic Operations
Basic Operations
43
To stop recording
To stop the VCR while recording, press p STOP.
2 Set the date, programme position, start
and stop times, tape speed, and VPS/
PDC function:
1 Press CURSOR / to flash each item in
turn.
2 Press CURSOR >/. to set each item.
To correct a setting, press CURSOR ? to
return to that setting and reset.
• To record the same programme every day or the same day every
week, see “Daily/weekly recording” on page 44.
• To use the VPS/PDC function, set VPS/PDC to ON. For details of
the VPS/PDC function, see “Timer recording with VPS/PDC
signals” on page 40.
• To record from a decoder or other source connected to the LINE-1
(TV), LINE-3 IN (Scart) connector, or LINE 2 IN VIDEO/AUDIO
jacks, press INPUT SELECT to display “L1,” “L3,” or “L2” in the
“PROG” position.
3 Press OK to complete the setting.
4 Press ON/STANDBY to turn off the VCR.
The indicator appears in the display window and the VCR
stands by for recording.
To record from a decoder or other source, leave the connected
equipment switched on.
INPUT
SELECT
DATE
SP
TIMER
PROG
TODAY ––
SP / LP
ON
VPS / PDC
SELECT
SET
OK
:
:
:OK
WE21.9
TIME
–:–– –:––
•
CURSOR
• OK
continued
• ON/
STANDBY