Sony SLV-N80 VCR User Manual


 
91
Searching for a selected point on the tape
Additional Operations
To cancel searching
Press H PLAY or x STOP.
To turn off the bar indication
Press DISPLAY again.
Notes
The figure on the bar indication represents the total time length of the inserted tape as shown
below.
The total time length may not be displayed correctly for:
Tapes other than T-60, T-120, or T-160.
Tapes recorded in more than one tape speed mode.
If you move the pointer (F) on the bar indication while searching, the VCR searches for the
new reset point.
With the bar indication on, the M FF/ , and m REW/ < buttons on the remote
commander work only for moving the pointer (F), while the M FF and m REW
buttons on the VCR
are used for normal tape operation. Note, however, if you press these
buttons on the VCR
, searching is canceled.
Tape type
Total time length
SP LP EP
T-60 or shorter 60 120 180
from T-80 to T-140 120 240 360
T-160 or longer 160 320 480